IP Dome Kamera D25 O proizvodu    Uputstvo za rukovanje kamerom    Tehnički detalji

Uklapa se u prostor a vrši nadgledanje

Elegancija i diskrecija bazirana na vrhunskoj tehnologiji: do 30 HiRes slika u sekundi i odličan kvalitet slika čak i u uslovima loše osvetljenosti. MOBOTIX D25 kamera je savršena za svaku situaciju. Izmenjiva sočiva i različite opcije za konfiguraciju i montažu, uključujući i antivandal set, podržavaju bezbroj mogućih aplikacija.

  • Elegantna dome kamera sa izmenjivim sočivima od tele do širokougaonih
  • Brojne opcije za unutrašnju i spoljašnju instalaciju
  • 5MP senzor za detaljne slike i glatke video strimove čak i u mračnom okruženju
  • Integrisani DVR (do 64 GB) za drugotrajno snimanje bez mrežnog opterećenja
  • Robusna, sa minimalnim održavanjem, za sve vremenske prilike (IP65) i bez pokretnih delova
  • Digitalan zum (poboljšan zahvaljujući 5MP tehnologiji), pan, tilt
  • Inteligentan senzor pokreta (MxActivitySensor)
  • Može se nadograditi u interfon korišćenjem MOBOTIX ExtIO modula

Novi senzor od 5 Megapiksela

MxActivitySensor

 

 
 
Available Accessories

In-Ceiling Set

On-Wall Set

Vandalism Set for D25

D22 and Q22 In-Ceiling Set

D22_Q22_On-Wall Set

Vandalism Set, polished

  • Suitable for D25 IT/Sec, Q25 Sec and ExtIO
  • Consists of in-ceiling mount and mounting parts
  • Easy mounting from front
  • Installation dimension: Ř 150 mm
  • For D25 IT/Sec, Q25 Sec and ExtIO
  • Consists of on-wall mount and mounting parts
  • Protects the cabling
  • Allows integrating additional modules
  • Dimensions: 165 mm x 37 mm
  • Cover of stainless steel
  • Consists of stainless steel cover and security screws
  • Reinforced dome (3mm polycarbonate)
  • Ideally suited for surveillance at extremely critical locations

Outdoor Wall Mount

Pole Mount For Use With Wall Mount MX-OPT-WH

ExtIO Extension Module

Wall Mount D22 and Q22

D22_Q22_Pole Mount

  • For D25 IT/Sec and Q25 Sec and ExtIO
  • Weatherproof (IP65) wall mount
  • Covers RJ45 wall outlets
  • Space for expansion modules (battery, UMTS, WLAN, etc.)
  • Easily mounted to poles using pole mount
  • Fastening for Dome wall mount MX-OPT-WH
    (for D25 IT/Sec, Q25 Sec and ExtIO)
  • 3 mm stainless steel, white
  • Delivery includes mounting parts and 2 stainless steel straps for pole diameters of 60 - 180 mm
  • Extension for MOBOTIX cameras
  • Microphone/speaker
  • PIR sensor for motion detection, temperature sensor
  • Integrated switch functions
  • not for Basic models

Power Adapter PoE Set

MX-Overvoltage-Protection-Box

MX-NPA-Box

Netzwork Power Adapter Set

Overvoltage-Protection-Box

MX NPA Box

  • PoE injector incl. crossover function for direct connection to the PC
  • For all MOBOTIX cameras (except for M1 und M10), Mx2wire and all PoE devices
  • For connection to the power network, to voltage sources 12 - 42 V, to all PoE classes with input voltage starting from 16 V!
  • Surge protection for MOBOTIX IP Cameras
  • Protects against surges of up to 4 kV on the PoE network cabling
  • For patch cable to patch cable or patch cable to installation cable (MX-Overvoltage-Protection-Box-LSA)
  • Complete set including mounting supplies
  • Weatherproof network connector (IP65) with surge protection of up to 4 kV for MOBOTIX IP cameras; ideal for replacing MX-Patch-Box

Weatherproof PoE Injector and network connector (-30 to +60 °C / -22 to +140 °F; IP65). IEEE 802.3af Network Power Adapter (NPA) for power supply by external power supply units and batteries from 12 to 57 V DC.

MX-GPS-Box

MX-232-IO-Box

  

MX GPS Box

MX-232-IO-Box

 

Weatherproof GPS time base for MOBOTIX systems (-30 to +60 °C / -22 to +140 °F; IP65) Includes outdoor temperature and illumination sensors. Connects via 2-wire cable (not with Q24, D24, M24).
  • Weatherproof signal input/output (-30 to +60 °C / -22 to +140 °F; IP65)
  • Connection of external sensors and switching of external devices via MOBOTIX cameras
  • RS232 interface, connection to camera using USB or MxBus
  • Not for Basic models