IP kamera Mobotix C26 unutrašnja 360° Tehnički podaci  Tehnički podaci

IP kamera Mobotix C26 unutrašnja 360°
Unutrašnja plafonska kamera. Lako se instalira.

IP kamera Mobotix C26 je najmanja i najlakša Mobotix-ova hemisferna kamera za ugradnju u plafon u zatvorenom prostoru. Njene karakteristike uključuju dnevno-noćni senzor osetljiv na svetlost od 6 megapiksela i alate za video analizu MxAnalitics, koji se mogu koristiti, na primer, za prikazivanje kretanja kupaca u prodajnim prostorijama.

 

  • Sistemska platforma Mx6 sa H.264 i ONVIF kompatibilnošću
  • Snimanje na internoj MicroSD kartici (4 GB standardno)
  • Za postavljanje na plafon ili ugao, opcionalni set za zid
  • Alati za video analizu MxAnalitics kao standard
  • Varijante sa audio paketom (mikrofon i zvučnik)
  • Integrisani senzor vibracija i temperature
  • Lako se instalira kao ugradna lampa

 

Varijante
Optimalna pokrivenost sobe

IP kamera Mobotix C26 je dostupna kao kompletna kamera sa dnevnim ili noćnim senzorima od 6 megapiksela i objektivom od 180° ili 103° ultra širokougaonim objektivom. Dvosmernu komunikaciju podržavaju odgovarajuće audio varijante, koje uključuju mikrofon i zvučnik. Modul za proširenje je pričvršćen na zadnjoj strani kamere za integrisanje dodatnih ulaznih, izlaznih i alarmnih funkcija.

 

 

360° svestrani pogled
Tehnologija hemisferne slike

Zaštićena Mobotix tehnologija koja uključuje sve u jednu sliku omogućuje jednoj kameri da diskretno nadgleda čitavu prostoriju bez ikakvih mrtvih tačaka. Ovo oomogućuje bolji pregled nego što bi to učinilo nekoliko pojedinačnih kamera, a istovremeno nudi mogućnost zumiranja detalja. Ovo značajno smanjuje troškove i broj potrebnih kamera.

Brza instalacija
U spuštenim plafonima

Kamera je pogodna za ugradnju u stropne ploče najveće debljine 26 milimetara u kojima se kružni otvor promera 105 mm izrezuje pomoću standardne glave za bušenje. IP kamera Mobotix C26 , koja je povezana na Ethernet kabl, jednostavno se ubacuje odozdo pomoću podignutih opružnih kopči i automatski učvršćuje.

 

 

Ugaona instalacija
Pregled bez mrtvih tačaka

IP kamera Mobotix C26 sa 103 ° sočivom i ugaonim kompletom za ugradnju predstavlja drugu opciju ugradnje. Ova kombinacija omogućuje praćenje cele prostorije iz jednog ugla bez slepih tačaka. Ugaoni instalacioni set jednostavno se instalira na tri fiksne tačke, a IP kamera Mobotix C26 se postavlja na svoje mesto unutar ovih tačaka bez ikakvog alata.

MxAnalitics
Standardna opcija

Video analiza integrisana u kameru omogućuje prikupljanje statističkih podataka o ponašanju ljudi i objekata. To se postiže definisanjem zona prepoznavanja i prebrojavanjem hodnika. Kamera zatim snima koliko često se svaki hodnik prebrojavanja prelazi u određenom periodu. Najčešće posećena područja u zoni prepoznavanja označena su bojom unutar toplotne karte.

 

 

 

 

 

 

 
   
Accessories for Hemispheric c26

MX-Bus-IO-Module

Power Adapter PoE Set

Ethernet Patch Cable

Netzwork Power Adapter Set

Ethernet Patch Cable
  • Expansion module for Indoor Cameras c26, i26, p26 and v26 (installed on the back)
  • Not suitable for x25 indoor cameras
  • For connecting external sensors (e.g., door and window contacts) and switches of external devices (e.g., relays with lamps and motors)
  • Two inputs (galvanically separated): 0 V to 48 V AC/DC
  • Two outputs: 2x floating (load per contact max. 30 W or 1 A or 48 V AC/DC) or 2x 12 V DC (max. 50 mA per output)
  • 2x MxBus terminal connector (MxBus will be supported only by later available hardware versions of the x26 cameras)
  • Ambient temperature: 0°C to 40°C (32°F to 104°F)
  • Power consumption: 1 W
  • PoE injector incl. crossover function for direct connection to the PC
  • For all Mobotix cameras (except for M1, M10 and D10), Mx2wire and all PoE devices
  • Provides compatible PoE power supply (IEEE 802.3af) for direct connection to PC and camera

 
  • For the weatherproof connection of Mobotix devices  ( cameras , interface boxes )
  • With special sealing
  • 2 x RJ45 plug

MX-BPA-Box

MX-Input-Box

MX-Overvoltage-Protection-Box

MOBOTIX Input Box

Overvoltage-Protection-Box
  • Weatherproof interface box (IP65, -30°C to +60°C (-22°F to +140°F)) that can be positioned at any point on an MxBus connection cable
  • Simple functional expansion of the system by means of simultaneous power supply and use of up to 7 MxBus modules on one camera (max. 9 watts)
  • Reduced load on the camera (less heat developing, higher performance) because the MX-BPA-Box supplies all power to the MxBus modules
  • Connection of standard voltage sources and batteries to the MX-BPA-Box (12 to 48 V DC)
  • Plug & play: The MX-BPA-Box features auto configure function
  • Maximum length of MxBus two-wire cable: 100 m

 
  • Weatherproof interface box (IP65, -30 °C to +60 °C (-22 °F to +140 °F)) with six self-powered inputs
  • Simple and fast camera connection via a two-wire MxBus cable (up to 50 m)
  • Flexible camera sensor expansion by connecting up to 6 external sensors per box (e.g., window/door contacts, light barriers etc.)
  • Intelligent communication with cameras and MxBus modules in common network via MxMessageSystem
  • Surge protection for Mobotix IP Cameras
  • Protects against surges of up to 4 kV on the PoE network cabling
  • For patch cable to patch cable or patch cable to installation cable (MX-Overvoltage-Protection-Box-LSA)
  • Complete set including mounting supplies
  • Weatherproof network connector (IP65) with surge protection of up to 4 kV for Mobotix IP cameras; ideal for replacing MX-Patch-Box

MX-NPA-Box

MX-232-IO-Box

ExtIO Extension Module

MX NPA Box

MX-232-IO-Box

Weatherproof PoE Injector and network connector (-30 to +60 °C / -22 to +140 °F; IP65). IEEE 802.3af Network Power Adapter (NPA) for power supply by external power supply units and batteries from 12 to 57 V DC.

  • Weatherproof signal input/output (-30 to +60 °C / -22 to +140 °F; IP65)
  • Connection of external sensors and switching of external devices via Mobotix cameras
  • RS232 interface, connection to camera using USB or MxBus
  • Not for Basic models

 
  • Extension for Mobotix cameras
  • Microphone/speaker
  • PIR sensor for motion detection, temperature sensor
  • Integrated switch functions not for Basic models

MX-MT-OW-1

MX-MT-CM-1

MX-MT-TUBE100/200 MX-MT-TUBE

MX-MT-OW-1

MX-MT-CM-1

MX-MT-TUBE100/200 MX-MT-TUBE
  • Suitable for: c2x und p2x
  • Consists of on-wall mount and mounting parts
  • Enables on-wall cabling of the camera and integrates additional modules (e.g, two Interface Boxes)
  • Camera distance from the wall: ca. 80 mm
  • Diameter: 140 mm
  • Recommended only for ceiling installation
  • Color: White
  • Suitable for: c2x
  • Consists of on-wall mount and mounting parts
  • Mounting in a room corner Mounting position plus 35° tilt angle enable one camera (e.g, c2x with 103° lens B036) to capture an entire room
  • Color: White

 
  • Suspension tube for MxTubeMount
  • Length: 1m/2m
  • Anodized aluminium
  • Outer diameter: 30 mm, wall thickness: 2 mm
  • For suspended ceiling installation of the cameras M1x/M2x/v2x/PTMount/PT-Mount-Thermal (each can be attached directly to the MxTubeMount) and of the cameras D2x/Q2x/c2x/p2x (each can only be attached to the MxTubeMount when using the optional on-wall mounting set of the camera)
  • Incl. drop down protection wire (length: 2.2 m/7.2 ft)
  • Additionally needed suspension tube MxTube with a length of 1m (3.3 ft) or 2 m (6.6 ft) to be ordered separately (MX-MT-TUBE100, MX-MT-TUBE200)
  • Alternative suspension with customary tubes: outer diameter 30 mm or 26.9 mm (R3/4“ according to DIN 2440), max. length: 2 m (6.6 ft), max. weight: 2.5 kg (5.5 lb), color/material of choice