IP kamera Mobotix I26 unutrašnja 180° Tehnički podaci  Tehnički podaci

IP kamera Mobotix I26 unutrašnja 180°
Savršena instalacija na zid - kompaktna, diskretna i jeftina.

IP kamera Mobotix I26 je posebno razvijena za zidnu instalaciju. Zahvaljujući uglu nagiba od 15°, pruža savršen pregled. IP kamera Mobotix I26 sa objektivom od 180° prati celu prostoriju. Kompaktan dizajn kamere osigurava neupadljiv izgled u svim okruženjima.


 

  • Sistemska platforma Mx6 sa H.264 i ONVIF kompatibilnošću
  • Snimanje na internoj MicroSD kartici (4 GB standardno)
  • Optimizovano za zidnu ugradnju kao rešenje u zidu ili na zidu
  • Alati za video analizu MxAnalitics kao standard
  • Dostupne varijante sa audio paketom (mikrofon i zvučnik)
  • Integrisani senzor vibracija i temperature

 


Varijante
Profesionalna unutrašnja zidna kamera

IP kamera Mobotix I26 je alternativa IP kamera Mobotix C26 koja je pogodna za zidnu instalaciju. Dostupna je kao kmpletna kamera sa dnevnim ili noćnim senzorima od 6MP i objektivom od 180° ili 103° ultra širokougaonim objektivom. Audio varijante uključuju dodatni mikrofon i zvučnik. Modul za proširenje omogućuje integraciju dodatnih ulaznih, izlaznih i alarmnih funkcija.

 

 

Panoramski ekran od 180 °
Specijalno poluobličasto sočivo B016

Poluloptasta IP kamera Mobotix I26 vidi sve. Zahvaljujući horizontalnom i vertikalnom vidnom polju od 180°, jedna kamera može nadgledati celu prostoriju bez ikakvih slepih tačaka, od zida do zida i od poda do plafona. Nagib od 15° nadole stavlja događaje i ljude ispred i u centar (unutar slike). Kada je instalirana iznad vrata, IP kamera Mobotix I26 takođe nadgleda područje neposredno ispod njih.

Standardne karakteristike
Ekskluzivne karakteristike

Izuzetno pouzdane i kvalitetne tehničke komponente. Kamera je takođe vrlo pogodna za kontinuirani rad u profesionalnim okruženjima. Senzor od 6 megapiksela osetljiv na svetlost sa najnovijom tehnologijom obrade slika Mobotix snima izuzetno detaljne, oštre slike do 2592x1944 piksela. Širok spektar softverskih funkcija. Mobotix Flash File Sistem (MxFFS) za sigurno šifrovano, duplirano skladištenje podataka i kreiranje automatskih rezervnih kopija tokom privremenih kvarova na mreži.

 

 

HD Audio
Zvuči odlično

IP kamera Mobotix I26 je opcionalno dostupna sa mikrofonom i zvučnikom (ne može se naknadno ugraditi). Osim za snimanje video zapisa sa vrhunskim kvalitetom zvuka, kamera se može koristiti i za oglašavanje u prodajnim prostorijama ili izložbenim salonima. Kada se aktivira unutrašnji senzor, IP kamera Mobotix I26 može uplašiti neželjene posetioce automatskim oglašavanjem alarma.

Oblasti primene
Profesionalna unutrašnja zidna kamera

Tipična područja primene su unutrašnje primene u maloprodajnim prostorima, supermarketima, javnim zgradama, zdravstvenim i obrazovnim ustanovama, sajmovima i izložbenim prostorima, restoranima, hotelima, rekreacionim objektima i stambenim zgradama, kao i nadzor procesa industrijske proizvodnje.

 

 

 
 

MX-Bus-IO-Module

Power Adapter PoE Set

Ethernet Patch Cable

Netzwork Power Adapter Set

Ethernet Patch Cable
  • Expansion module for Indoor Cameras c26, i26, p26 and v26 (installed on the back)
  • Not suitable for x25 indoor cameras
  • For connecting external sensors (e.g., door and window contacts) and switches of external devices (e.g., relays with lamps and motors)
  • Two inputs (galvanically separated): 0 V to 48 V AC/DC
  • Two outputs: 2x floating (load per contact max. 30 W or 1 A or 48 V AC/DC) or 2x 12 V DC (max. 50 mA per output)
  • 2x MxBus terminal connector (MxBus will be supported only by later available hardware versions of the x26 cameras)
  • Ambient temperature: 0°C to 40°C (32°F to 104°F)
  • Power consumption: 1 W
  • PoE injector incl. crossover function for direct connection to the PC
  • For all Mobotix cameras (except for M1, M10 and D10), Mx2wire and all PoE devices
  • Provides compatible PoE power supply (IEEE 802.3af) for direct connection to PC and camera

 

 
  • For the weatherproof connection of Mobotix devices  ( cameras , interface boxes )
  • With special sealing
  • 2 x RJ45 plug

 

MX-BPA-Box

MX-Input-Box

MX-Overvoltage-Protection-Box

MOBOTIX Input Box

Overvoltage-Protection-Box
  • Weatherproof interface box (IP65, -30°C to +60°C (-22°F to +140°F)) that can be positioned at any point on an MxBus connection cable
  • Simple functional expansion of the system by means of simultaneous power supply and use of up to 7 MxBus modules on one camera (max. 9 watts)
  • Reduced load on the camera (less heat developing, higher performance) because the MX-BPA-Box supplies all power to the MxBus modules
  • Connection of standard voltage sources and batteries to the MX-BPA-Box (12 to 48 V DC)
  • Plug & play: The MX-BPA-Box features auto configure function
  • Maximum length of MxBus two-wire cable: 100 m

 

 

 
  • Weatherproof interface box (IP65, -30 °C to +60 °C (-22 °F to +140 °F)) with six self-powered inputs
  • Simple and fast camera connection via a two-wire MxBus cable (up to 50 m)
  • Flexible camera sensor expansion by connecting up to 6 external sensors per box (e.g., window/door contacts, light barriers etc.)
  • Intelligent communication with cameras and MxBus modules in common network via MxMessageSystem

 

 
  • Surge protection for Mobotix IP Cameras
  • Protects against surges of up to 4 kV on the PoE network cabling
  • For patch cable to patch cable or patch cable to installation cable (MX-Overvoltage-Protection-Box-LSA)
  • Complete set including mounting supplies
  • Weatherproof network connector (IP65) with surge protection of up to 4 kV for Mobotix IP cameras; ideal for replacing MX-Patch-Box

 

 

MX-NPA-Box

MX-232-IO-Box

ExtIO Extension Module

MX NPA Box

MX-232-IO-Box

Weatherproof PoE Injector and network connector (-30 to +60 °C / -22 to +140 °F; IP65). IEEE 802.3af Network Power Adapter (NPA) for power supply by external power supply units and batteries from 12 to 57 V DC.

 

 

 
  • •  Weatherproof signal input/output (-30 to +60 °C / -22 to +140 °F; IP65)
  • •  Connection of external sensors and switching of external devices via Mobotix cameras
  • •  RS232 interface, connection to camera using USB or MxBus
  • Not for Basic models

 

 

 
  • Extension for Mobotix cameras
  • Microphone/speaker
  • PIR sensor for motion detection, temperature sensor
  • Integrated switch functions
  • not for Basic models

 

 

MX-OPT-AP2

MX-OPT-UP1

MX-MT-TUBE100/200 MX-MT-TUBE

MX-OPT-AP2

MX-OPT-UP1

MX-MT-TUBE100/200 MX-MT-TUBE
  • Suitable for: i25
  • Consists of on-wall mount and mounting parts
  • Enables on-wall cabling of the camera
  • Camera distance from the wall: ca. 25 mm
  • Recommended only for wall installation
  • Color: white

 

 
  • Cavity Wall Installation Set for the i2x
  • With cavity wall socket, stainless steel mounting plate, 2 Allen screws with washers
  • For installing the camera directly on the mounting plate, no dowels required
  • Mounting plate is screwed onto the cavity wall socket
  • Recommended only for wall installations

 

 
  • Suspension tube for MxTubeMount
  • Length: 1m/2m
  • Anodized aluminium
  • Outer diameter: 30 mm, wall thickness: 2 mm
  • For suspended ceiling installation of the cameras M1x/M2x/v2x/PTMount/PT-Mount-Thermal (each can be attached directly to the MxTubeMount) and of the cameras D2x/Q2x/c2x/p2x (each can only be attached to the MxTubeMount when using the optional on-wall mounting set of the camera)
  • Incl. drop down protection wire (length: 2.2m)
  • Additionally needed suspension tube MxTube with a length of 1m (3.3 ft) or 2 m (6.6 ft) to be ordered separately (MX-MT-TUBE100, MX-MT-TUBE200)
  • Alternative suspension with customary tubes: outer diameter 30 mm or 26.9 mm (R3/4“ according to DIN 2440), max. length: 2 m (6.6 ft), max. weight: 2.5 kg (5.5 lb), color/material of choice