IP kamera Mobotix V16 Vandalizam Tehnički podaci Tehnički podaci

IP kamera Mobotix V16 Vandalizam
Za ugaonu montažu. Sistem dvostruke kamere sa velikom sigurnošću.

IP kamera Mobotix V16 modeli su najsnažniji od svih Mobotix kamera i mogu izdržati i najteže napade. Unutra imaju uvek najnoviju, višenamensku Mobotix tehnologiju dvostrukih kamera sa opcijom povezivanja spoljnih uređaja i senzora.

 

  • Sistemska platforma Mx6 sa kompatibilnošću H.264 i ONVIF
  • Snimanje na internu MicroSD karticu (standardno 4 GB)
  • Integrisani mikrofon i zvučnik
  • Mogu se koristiti svi konektori modula kamere S16
  • Sa jednim ili dva 6MP senzorska modula (dan/noć)
  • Integrisani detektor udara
  • Otporno na vremenske uslove i robusno kućište kamere (IP66, IK10 +)

Varijante
Konfiguracija sočiva zasnovana na potrebama

IP kamera Mobotix V16 sa dva frontalno postavljena senzora slike može da uhvati potpuno isto područje po danu i mraku. Nadzor od zida do zida bez mrtvih tačaka moguć je pomoću jednog senzora slike napred i jednog senzora slike nadole.

 
 

Otporan na metke
Izuzetno gust oklop od nerđajućeg čelika

Kućište od nerđajućeg čelika debljine do 5 mm postavljeno je gore i van dohvata ruke u uglu sobe, a može čak i da podnese vatru iz pištolja. Napravljen je za lokacije sa ekstremnim ekološkim uslovima poput vojnih lokacija, zatvora i ambasada.

Karakteristike enterijera
Modularna tehnologija IP kamere Mobotix S16

U IP kameri Mobotix V16 je skrivena IP kameri Mobotix S16 sa dva zamenljiva modula senzora i širokim spektrom inteligentnih funkcija video analize i opcijama sočiva (isključujući Hemispheric). Zahvaljujući integrisanom mikrofonu i zvučniku, IP kamera Mobotix V16 omogućava dvosmernu VoIP komunikaciju bez dodatne opreme.

 
 

MxActivitiSensor
Inovativna detekcija pokreta bez lažnih alarma

Zahvaljujući sofisticiranim tehnologijama video senzora, događaji se mogu precizno definisati, a upozorenja se pružaju samo u odgovarajućim situacijama. MxActivitiSensor otkriva kretanja u ekstremnim situacijama sa vrlo visokim stepenom pouzdanosti. Ovo sprečava lažne alarme i dugotrajan rad na konfiguraciji. MxActivitiSensor smanjuje lažne alarme i do 90 procenata i dovodi do značajnih ušteda u instalaciji i operativnim troškovima

Životna sredina
Najniži mogući troškovi energije zahvaljujući Mobotix-u

Svaka Mobotix kamera napaja se pomoću standardnog PoE (IEEE 802.3af) i ne zahteva više od 5W tokom standardnog rada. Zahvaljujući inovativnom Mobotix dizajnu male snage, Mobotix kamere imaju najniže moguće troškove energije. Mobotix Moonlight tehnologija obezbeđuje dalje uštede energije, jer su potrebni minimalni ili nikakvi dodatni izvori svetlosti.

 
 

Po narudžbi
Kamera ručno proizvedena

Jedna vandalska kamera sa dva senzora: Nakon prijema narudžbine, IP kamere Mobotix V16 vandalizam se uvek proizvode pojedinačno u skladu sa specifikacijama kupaca. Molimo vas da kontaktirate svog partnera za Mobotix ili naš tim za korisničku podršku kako biste pronašli najprikladniji sistem za vas (pozicioniranje tipa i senzorskog modula).

 

 
       
Available Accessories

MX-EXTIO

MX-2WirePlus-Set-PW

MX-GPS-Box

  • Weatherproof extension for all MOBOTIX cameras (except Basic models)
  • Power supply: PoE (Class 2, IEEE 802.3af) or USB (connection cable to be ordered individually)
  • Microphone/speaker
  • Line-in / Line-out
  • PIR sensor for motion detection
  • Temperature sensor
  • 2 buttons (e.g., lights, doorbell)
  • 2 galvanically separated inputs
  • 2 galvanically separated outputs
  • Protection class IP65, -30 to 60°C / -22 to 140°F
  • Robust housing made of fiber-reinforced plastic PBT-GF30
  • Mounting to a wall or ceiling, optionally with MOBOTIX mounting accessories (to be ordered individually)
  • Connecting via USB
  • Mx2wire+ turns an existing two-wire cable into a modern multimedia cable
  • Ethernet and PoE data transfer using a two-wire cable
  • Simple connection of 10/100 Mbps Ethernet end devices (e.g., IP camera, IP telephone)
  • Power supply for Mx2wire+ and end device via PoE/PoE+ or 48–57 V DC, 600 mA
  • Connected end devices are supplied with up to 13 watts via PoE (PoE class 3)
  • Maximum data transfer range of 500 m and data rate of up to 50 Mbps (depending on distance)
  • No need for expensive and time-consuming installation of network cables
  • Perfect for wireless communication is not possible (due to distance to sender, thickness of walls, etc.)
  • Network extension, including PoE, by connecting a Cat7 cable of up to 500 m in length as a two-wire cable
  • Simple installation in standard sockets (surface- or flush-mounted)
  • Two LEDs display current connection and supply statuses
  • Developed, produced and patented by MOBOTIX Germany
  • Ambient temperature: -30 to 50°C / -22 to 122°F
  • Complete set consisting of two Mx2wire+ units, on-walls sockets and mounting parts
  • Weatherproof GPS time base for MOBOTIX systems
  • GPS and Glonass support
  • Includes outdoor temperature and illumination sensors
  • Connects via MxBus 2-wire cable
  • Protection class IP66/IK08, -30 to 60°C / -22 to +140°F
  • Box can be mounted safely out of reach in the wall mounts of M1x, M2x, D1x and D2x

MX-232-IO-Box

MX-NPA-Box

MX-Overvoltage-Protection-Box-RJ45 (LSA) 

  • Weatherproof connection of external sensors and switching of external devices via MOBOTIX cameras
  • Connection to camera using USB or MxBus
  • 2 self-powered inputs for connecting sensors
  • 2 outputs: 1 powered output, 1 isolated relay output (can be switched to second powered output)
  • RS232 interface when using MOBOTIX USB cable to connect to camera
  • Protection class IP65, -30 to 60°C / -22 to 140°F
  • Box can be mounted safely out of reach in the wall mounts of M1x, M2x, D1x and D2x

 

  • Weatherproof PoE Injector (IEEE 802.3af) and network connector
  • Needs external power supply units and batteries from 12 to 57 V DC
  • Protection class IP65, -30 to 60°C / -22 to 140°F
  • Important: only use with original MOBOTIX patch cables
  • Box can be mounted safely out of reach in the wall mounts of M1x, M2x, D1x and D2x
  • Weatherproof connection of one/two MOBOTIX patch cable/s (RJ45, from camera) and the network installation cable
  • Protects one MOBOTIX camera against surges of up to 4 kV on the PoE network cabling
  • Complete set including mounting supplies
  • Protection class IP65, -30 to 60°C / -22 to 140°F
  • Box can be mounted safely out of reach in the wall mounts of M1x, M2x, D1x, D2x

MX-OPT-DIGI-INT

MX-OPT-Input1-EXT

MX-OPT-Output1-EXT

  • Interface box to connect one analog camera directly to a S1x Body as alternative image source (instead of one sensor module)
  • Up to two MxDigitizer boxes or two analog cameras can be connected to one S1x Body
  • Easy integration of analog cameras into the MOBOTIX IP video system incl. the support of MOBOTIX integrated image analysis tools (e.g, MxActivitySensor)
  • Box digitizes the analog signal input (NTSC/PAL)
  • Output format PAL: 704 x 525 pixels, up to 25 frames per second
  • Output format NTSC: 640 x 480 pixels, up to 30 frames per second
  • BNC connection of analog camera to MxDigitizer
  • Sensor cable connection of MxDigitizer to S1x Body (to be ordered separately, maximum length 3 m/9.8 ft)
  • Operating conditions: Indoors, 0 to 40°C (32 to 104°F)
  • Color: white
  • Weatherproof connection of external sensors
  • Connection to camera using MxBus
  • 6 self-powered inputs for connecting up to 6 external sensors
  • Protection class IP65, -30 to 60°C / -22 to 140°F
  • Box can be mounted safely out of reach in the wall mounts of M1x, M2x, D1x, D2x
  • Weatherproof connection of external devices and power relays
  • Connection to the camera via MxBus
  • Six self-powered outputs (12 V, each 10 mA)
  • Two isolated outputs (can be switched to “self-powered” using a jumper: 12 V, max. 50 mA)
  • Protection class IP65, -30 to 60 °C / -22 to 140°F
  • Box can be mounted safely out of reach in the wall mounts of M1x, M2x, D1x, D2x