IP kamera Mobotix V26 Tehnički podaci  Tehnički podaci

IP kamera Mobotix V26
Savršeno zaštićena. Profesionalno opremljena.

Kupolasta kamera, koja je dostupna u crnoj ili beloj boji, može biti opremljena sa šest različitih vrhunskih objektiva Mobotix HD sa vidnim poljima od 103° do 15°. Zidni set sa integrisanim mikrofonom i zvučnikom opciono je dostupan, kao i set za vandalizam za povećanu zaštitu kamere sa prstenom od nerđajućeg čelika i ojačanom kupolom.


 

  • Sistemska platforma Mx6 sa H.264 i ONVIF kompatibilnošću
  • Snimanje na internoj MicroSD kartici (4 GB standardno)
  • Lako se instalira u plafon, opciono dostupna sa zidnim kompletom sa zvukom
  • Pojačana zaštita od manipulacije putem opcionog seta vandalizma
  • Ručno podesivi ugao nagiba objektiva od 0° do 90°
  • Alati za video analizu MxAnalitics kao standard
  • Integrisani senzor vibracija i temperature

 


Varijante
Kompletan paket

Potpuno video sigurnosno rešenje, uključujući snimanje događaja na SD karticu ili NAS sistem, alarmne pozive, profesionalno upravljanje videom i video analizu sa toplotnim mapama i statistikom objekata. Kućište IP kamere V26 , koje je dostupno u crnoj ili beloj boji, ima integrisani moolight senzor od 6MP i kompatibilan je sa svim standardnim objektivima Mobotix sa horizontalnim uglovima slike od 15° do 103°.

 

 

Instalacija
Tako lako, tako brzo, tako sigurno

Kao i svi unutrašnji modeli Mobotix, IP kamera Mobotix V26 se može lako instalirati u roku od nekoliko minuta. Sočivo se lako menja, telo IP kamere Mobotix V26 se može podesiti horizontalno i vertikalno, a kamera uvek omogućava najbolji ugao gledanja pri postavljanju na zid ili plafon.

Pribor
Omogućuje još fleksibilniju instalaciju

Dvosmerni komunikacioni interfoni sa HD zvukom se mogu implementirati za IP kameru Mobotix V26 sa zidnim audio kompletom i integrisanim zvučnikom i mikrofonom. Štaviše, IP kamera Mobotix V26 je takođe kompatibilna sa MxTubeMount-om za viseću ugradnju u nestrukturisane plafone na visinama do 2m (kao što su supermarketi, aerodromi itd.).

 

 

Kompleti za vandalizam
Kada vam je potrebno pojačanje

Komplet za vandalizam je takođe dostupan za varijante IP kamere Mobotix V26 sa i bez zidnog seta. Sastoji se od prstena od nerđajućeg čelika i ojačane polikarbonatne kupole. Garantuje višu klasu zaštite (do IK10), čime se obezbeđuje potpuna zaštita kućišta kamere.

Dodatni signalni ulazi/izlazi
MxIOBoard-IC za sve unutrašnje kamere

MxIOBoard-IC je produžna ploča koja se može koristiti za sve unutrašnje kamere C26, I26, P26 i V26 i lako se pričvršćuje na zadnju stranu kamere ili na ploču kamere. Ploča dodaje dva ulaza i dva izlaza od 12V kameri. Izlazi se mogu direktno povezati na najviše dva releja (kao što je Eltako ER12-002-UC), a time i na veće napone i opterećenja, kao što su lampe ili motori.

 

 

 
 

Mx-A-IOA-IC

Power Adapter PoE Set

Ethernet Patch Cable

Netzwork Power Adapter Set

Ethernet Patch Cable
  • Expansion module for Indoor Cameras c26, i26, p26 and v26 (installed on the back)
  • Not suitable for x25 indoor cameras
  • For connecting external sensors (e.g., door and window contacts) and switches of external devices (e.g., relays with lamps and motors)
  • Two inputs (galvanically separated): 0 V to 48 V AC/DC
  • Two outputs: 2x floating (load per contact max. 30 W or 1 A or 48 V AC/DC) or 2x 12 V DC (max. 50 mA per output)
  • 2x MxBus terminal connector (MxBus will be supported only by later available hardware versions of the x26 cameras)
  • Ambient temperature: 0°C to 40°C (32°F to 104°F)
  • Power consumption: 1 W
  • PoE injector incl. crossover function for direct connection to the PC
  • For all Mobotix cameras (except for M1, M10 and D10), Mx2wire and all PoE devices
  • Provides compatible PoE power supply (IEEE 802.3af) for direct connection to PC and camera

 

 

 

 

 
  • For the weatherproof connection of Mobotix devices  ( cameras , interface boxes )
  • With special sealing
  • 2 x RJ45 plug

 

 

 

 

MX-BPA-Box

MX-Input-Box

MX-Overvoltage-Protection-Box

MOBOTIX Input Box

Overvoltage-Protection-Box
  • Weatherproof interface box (IP65, -30°C to +60°C (-22°F to +140°F)) that can be positioned at any point on an MxBus connection cable
  • Simple functional expansion of the system by means of simultaneous power supply and use of up to 7 MxBus modules on one camera (max. 9 watts)
  • Reduced load on the camera (less heat developing, higher performance) because the MX-BPA-Box supplies all power to the MxBus modules
  • Connection of standard voltage sources and batteries to the MX-BPA-Box (12 to 48 V DC)
  • Plug & play: The MX-BPA-Box features auto configure function
  • Maximum length of MxBus two-wire cable: 100 m

 

 

 

 
  • Weatherproof interface box (IP65, -30 °C to +60 °C (-22 °F to +140 °F)) with six self-powered inputs
  • Simple and fast camera connection via a two-wire MxBus cable (up to 50 m)
  • Flexible camera sensor expansion by connecting up to 6 external sensors per box (e.g., window/door contacts, light barriers etc.)
  • Intelligent communication with cameras and MxBus modules in common network via MxMessageSystem

 

 
  • Surge protection for Mobotix IP Cameras
  • Protects against surges of up to 4 kV on the PoE network cabling
  • For patch cable to patch cable or patch cable to installation cable (MX-Overvoltage-Protection-Box-LSA)
  • Complete set including mounting supplies
  • Weatherproof network connector (IP65) with surge protection of up to 4 kV for Mobotix IP cameras; ideal for replacing MX-Patch-Box

 

 

 

MX-NPA-Box

MX-232-IO-Box

ExtIO Extension Module

MX NPA Box

MX-232-IO-Box

Weatherproof PoE Injector and network connector (-30 to +60 °C / -22 to +140 °F; IP65). IEEE 802.3af Network Power Adapter (NPA) for power supply by external power supply units and batteries from 12 to 57 V DC.

 

 
  • Weatherproof signal input/output (-30 to +60 °C / -22 to +140 °F; IP65)
  • Connection of external sensors and switching of external devices via Mobotix cameras
  • RS232 interface, connection to camera using USB or MxBus
  • Not for Basic models

 
  • Extension for Mobotix cameras
  • Microphone/speaker
  • PIR sensor for motion detection, temperature sensor
  • Integrated switch functions
  • not for Basic models

 

MX-MT-OW-1

MX-MT-v25-V

MX-MT-TUBE100/200 MX-MT-TUBE

Mx-M-OWA-AU

MX-MT-v25-V

MX-MT-TUBE100
  • On-Wall Set with Audio for v26
  • Consists of on-wall mount, mounting parts, integrated speaker, microphone and camera plug-in connection cable
  • Enables on-wall cabling of the camera and integrates two additional Interface Box modules
  • Housing color: white

 

 

 

 

 
  • Suitable for: v2x without On-Wall Mounting Set with Audio
  • Stainless steel vandalism ring (matt) with safety screws
  • Protects the camera housing (only without On-Wall Set)
  • Reinforced lens cover (polycarbonate, 3 mm)
  • IK10+

 

 

 
  • Suspension tube for MxTubeMount
  • Length: 1m/2m
  • Anodized aluminium
  • Outer diameter: 30 mm, wall thickness: 2 mm
  • For suspended ceiling installation of the cameras M1x/M2x/v2x/PTMount/PT-Mount-Thermal (each can be attached directly to the MxTubeMount) and of the cameras D2x/Q2x/c2x/p2x (each can only be attached to the MxTubeMount when using the optional on-wall mounting set of the camera)
  • Incl. drop down protection wire (length: 2.2 m/7.2 ft)
  • Additionally needed suspension tube MxTube with a length of 1m (3.3 ft) or 2 m (6.6 ft) to be ordered separately (MX-MT-TUBE100, MX-MT-TUBE200)
  • Alternative suspension with customary tubes: outer diameter 30 mm or 26.9 mm (R3/4“ according to DIN 2440), max. length: 2 m (6.6 ft), max. weight: 2.5 kg (5.5 lb), color/material of choice