Unutrašnja IP kamera Mobotix P26 Tehnički podaci  Tehnički podaci

Unutrašnja IP kamera Mobotix P26
Fleksibilna i kompaktna. Prilagođava se vašim zahtevima.

IP kamera Mobotix P26 je standardno opremljena senzorom osetljivim na svetlost od 6 megapiksela i ručno podesivim objektivom (telefoto udaljenost od 15° do 180° polulopte), što ga čini pogodnim za svako unutrašnje okruženje. Zahvaljujući konkurentnoj ceni, čitavom nizu Mobotix funkcija i besplatnom softveru MxManagementCenter, ovaj sistem predstavlja jedno od najprivlačnijih rešenja za unutrašnju bezbednost na tržištu.


 

  • Sistemska platforma Mx6 sa H.264 i ONVIF kompatibilnošću
  • Snimanje na internoj MicroSD kartici (4 GB standardno)
  • Za plafonsku ugradnju, opcionalni zidni set
  • Funkcija ručnog naginjanja i pomeranja
  • Alati za video analizu MkAnalitics kao standard
  • Varijante sa audio paketom (mikrofon i zvučnik)
  • Integrisani senzor vibracija i temperature

 


Varijante
Naša ultra-kompaktna plafonska kamera

Izuzetno kompaktna IP kamera Mobotix P26 sa dnevnim ili noćnim senzorom prečnika 12cm i 6MP kompatibilna je sa našim standardnim objektivima od 15° do 103°. Dodatno, IP kamera Mobotix P26 je takođe dostupna kao kupolasta kamera sa vidnim poljem od 180°. Uz pomoć priloženog ključa za objektive, standardna sočiva se vrlo lako menjaju po želji. Dostupne su i varijante sa zvukom.

 

 

Fleksibilno pozicioniranje
Funkcija ručnog naginjanja i pomeranja

IP kamera Mobotix P26 je plafonska kamera koja se može nagnuti za 360° kada se instalira. Takođe je opremljena držačem za objektiv koji se može ručno naginjati. Ugao nagiba u odnosu na plafon je između -5° i -45°. Objektiv se može precizno podesiti prema oblasti koja se prati. Kada je instalirana u uglu sobe sa objektivom od 103°, IP kamera Mobotix P26 prati celu prostoriju sa visokim stepenom detalja slike.

Inteligentni softver
Sadrži sve što izdvaja Mobotix

IP kamera Mobotix P26 je kompletno video sigurnosno rešenje sa automatskim snimanjem događaja, alarmnim pozivima i profesionalnim video menadžmentom. Standardne vrhunske funkcije uključuju MxActivitiSensor za izuzetno pouzdano otkrivanje pokreta i alate za video analizu MxAnalitics sa brojenjem objekata i prikazom toplotne karte.

 

 

Brza instalacija
U idealnom slučaju, na spuštenim plafonima

IP kamera Mobotix P26 je pogodna za ugradnju u plafonske ploče najveće debljine 26mm u kojima je izrezan kružni otvor prečnika 105 mm. IP kamera Mobotix P26 , kojia je povezana na Ethernet kabl, jednostavno se ubacuje odozdo pomoću tri podignute opružne kopče i učvršćuje na mestu. Mobotix je razvio zidni set za betonske plafone.

Oblasti primene
Profesionalna unutrašnja zidna kamera

Tipična područja primene su unutrašnje primene u maloprodajnim prostorima, supermarketima, javnim zgradama, zdravstvenim i obrazovnim ustanovama, sajmovima i izložbenim prostorima, restoranima, hotelima, rekreacionim objektima i stambenim zgradama, kao i nadzor procesa industrijske proizvodnj

 

 

 
 

Mx-A-IOA-IC

Power Adapter PoE Set

Ethernet Patch Cable

Netzwork Power Adapter Set

Ethernet Patch Cable
  • Expansion module for Indoor Cameras c26, i26, p26 and v26 (installed on the back)
  • Not suitable for x25 indoor cameras
  • For connecting external sensors (e.g., door and window contacts) and switches of external devices (e.g., relays with lamps and motors)
  • Two inputs (galvanically separated): 0 V to 48 V AC/DC
  • Two outputs: 2x floating (load per contact max. 30 W or 1 A or 48 V AC/DC) or 2x 12 V DC (max. 50 mA per output)
  • 2x MxBus terminal connector (MxBus will be supported only by later available hardware versions of the x26 cameras)
  • Ambient temperature: 0°C to 40°C (32°F to 104°F)
  • Power consumption: 1 W

 

 
  • PoE injector incl. crossover function for direct connection to the PC
  • For all Mobotix cameras (except for M1, M10 and D10), Mx2wire and all PoE devices
  • Provides compatible PoE power supply (IEEE 802.3af) for direct connection to PC and camera

 

 

 

 
  • For the weatherproof connection of Mobotix devices  ( cameras , interface boxes )
  • With special sealing
  • 2 x RJ45 plug

 

 

 

MX-BPA-Box

MX-Input-Box

MX-Overvoltage-Protection-Box

MOBOTIX Input Box

Overvoltage-Protection-Box
  • Weatherproof interface box (IP65, -30°C to +60°C (-22°F to +140°F)) that can be positioned at any point on an MxBus connection cable
  • Simple functional expansion of the system by means of simultaneous power supply and use of up to 7 MxBus modules on one camera (max. 9 watts)
  • Reduced load on the camera (less heat developing, higher performance) because the MX-BPA-Box supplies all power to the MxBus modules
  • Connection of standard voltage sources and batteries to the MX-BPA-Box (12 to 48 V DC)
  • Plug & play: The MX-BPA-Box features auto configure function
  • Maximum length of MxBus two-wire cable: 100 m

 
  • Weatherproof interface box (IP65, -30 °C to +60 °C (-22 °F to +140 °F)) with six self-powered inputs
  • Simple and fast camera connection via a two-wire MxBus cable (up to 50 m)
  • Flexible camera sensor expansion by connecting up to 6 external sensors per box (e.g., window/door contacts, light barriers etc.)
  • Intelligent communication with cameras and MxBus modules in common network via MxMessageSystem

 
  • Surge protection for Mobotix IP Cameras
  • Protects against surges of up to 4 kV on the PoE network cabling
  • For patch cable to patch cable or patch cable to installation cable (MX-Overvoltage-Protection-Box-LSA)
  • Complete set including mounting supplies
  • Weatherproof network connector (IP65) with surge protection of up to 4 kV for Mobotix IP cameras; ideal for replacing MX-Patch-Box

 

MX-NPA-Box

MX-232-IO-Box

ExtIO Extension Module

MX NPA Box

MX-232-IO-Box

Weatherproof PoE Injector and network connector (-30 to +60 °C / -22 to +140 °F; IP65). IEEE 802.3af Network Power Adapter (NPA) for power supply by external power supply units and batteries from 12 to 57 V DC.

 

 
  • Weatherproof signal input/output (-30 to +60 °C / -22 to +140 °F; IP65)
  • Connection of external sensors and switching of external devices via Mobotix cameras
  • RS232 interface, connection to camera using USB or MxBus
  • Not for Basic models

 
  • Extension for Mobotix cameras
  • Microphone/speaker
  • PIR sensor for motion detection, temperature sensor
  • Integrated switch functions
  • not for Basic models

 

MX-MT-OW-1

MX-MT-TUBE100/200 MX-MT-TUBE

 

MX-MT-OW-1

MX-MT-TUBE100

 
  • Suitable for: c2x and p2x
  • Consists of on-wall mount and mounting parts
  • Enables on-wall cabling of the camera and integrates additional modules (e.g, two Interface Boxes)
  • Camera distance from the wall: ca. 80 mm
  • Diameter: 140 mm
  • Recommended only for ceiling installation
  • Color: White

 

 

 
  • Suspension tube for MxTubeMount
  • Length: 1m/2m
  • Anodized aluminium
  • Outer diameter: 30 mm, wall thickness: 2 mm
  • For suspended ceiling installation of the cameras M1x/M2x/v2x/PTMount/PT-Mount-Thermal (each can be attached directly to the MxTubeMount) and of the cameras D2x/Q2x/c2x/p2x (each can only be attached to the MxTubeMount when using the optional on-wall mounting set of the camera)
  • Incl. drop down protection wire (length: 2.2 m/7.2 ft)
  • Additionally needed suspension tube MxTube with a length of 1m (3.3 ft) or 2 m (6.6 ft) to be ordered separately (MX-MT-TUBE100, MX-MT-TUBE200)
  • Alternative suspension with customary tubes: outer diameter 30 mm or 26.9 mm (R3/4“ according to DIN 2440), max. length: 2 m (6.6 ft), max. weight: 2.5 kg (5.5 lb), color/material of choice